Application fluid for paint protection films
For optimal PPF installation, APE ApplePotion allows the film to glide perfectly and to adhere by applying pressure. The film can be removed after a short time without, making it easy to do corrections and changes.
Due to the basic properties of this potion, the adhesive of the protective film is not attacked and the film receives the desired glossy finish. Its Low Cloud technology also prevents the adhesive from forming clouds or becoming milky through the transparent film. APE ApplePotion of course is fully biodegradable, skin-friendly, clinically tested and pH-neutral.
Easy dosage, high effectiveness, low consumption
We recommend mixing the required amount with distilled water before each application. ApplePotion is of course perfectly workable even after being stored for longer durations.
The practical dosing aid in the 1 liter bottle saves you the fiddling with measuring cups: Simply open the second lid in the dosing bottle and press the bottle in slightly until the small container (50 ml) has filled up. Add this dosage amount to 1 liter of distilled water and the ApplePotion is ready for the next application. The quantity of 50 ml is our general recommendation - just try out different mixing ratios and see what works best for you!
The 10 liter canister is the perfect choice for recurring applications: Compared to the purchase of ten separate 1-liter bottles, you save more than 16% !
With the dosing pump for the canister, the mixing ratio can be exactly determined - so it's best to order it right away ;-)
Three jobs, one product: cleaning - applying - post-cleaning
Wrapping expert Rainer Lorz also uses the ApplePotion for perfect pre-cleaning and post-cleaning due to its outstanding features. With the dosing pump for the canister you mix cleanly and effortlessly the exact amount of APE ApplePotion or APE FoamPotion from the 10 liter canister. Each stroke delivers 10 ml of liquid. We recommend mixing 50ml (5 strokes) with 1 liter of distilled water.
APE ApplePotion is optimally dispensed on the car body with the EasyPump spray bottle. We also recommend using our APE Duo squeegees or one of the PPF Sandwiches for PPF installations!
Product features
- application fluid for paint protection films
- 1 liter bottle with dosage aid
10 liter canister for use with dosing pump (sold separately) - excellent yield: 1 liter of APE ApplePotion equals 20 liters of application fluid
- completely biodegradable
- skin-friendly
- clinically tested
- pH-neutral
Alternatively, we offer the APE FoamPotion adhesive foam: The foam pattern underneath the film helps you to see where the squeegee has not been used yet. This makes it easier to apply PPF perfectly to all areas of the car body.
