Self-adhesive magnet pads for non-magnetic surfaces
When we launched the GeckoPatch series many years ago, we had no idea that this idea would one day make the lives of thousands of signmakers easier.
Many of you wished for a little more holding power for larger graphics or higher loads. We are fulfilling this wish with the GeckoPatch Power: The stronger sheet metal carrier provides a threefold increased pulling force of the magnets. We recommend using the YelloBlade or at least two-handed operation when removing the Power patches from glass panes etc.
3 times the adhesive force due to 1 mm thick sheet metal
However, since the thicker sheet metal comes at the expense of the flexibility of the GeckoPatch Power, which is desirable in many applications, we see this product series as an extension and not as a replacement of the existing patches. Try it yourself and choose the appropriate GeckoPatches for your individual application!
- reusable adhesive pads
- applicable on all smooth surfaces
- strong magnetic tack due to 1 mm thick plate
Sizes & dimensions
- S = 5 x 5 cm / 2" x 2" (metal plate), 8 x 8 cm / 3" x 3" (total dimension with self-adhesive pad)
- M = 10 x 5 cm / 2"x 4" (metal plate), 13 x 8 cm / 5" x 3" (total dimension with self-adhesive pad)
- L = 10 x 10 cm / 4"x 4" (metal plate), 13,5 x 14 cm / 5.3" x 5.5" (total dimension with self-adhesive pad)
- Flexi = 4 plates of 5 x 5 cm / 2" x 2" each (metal plate), 13.5 x 14 cm / 5.3" x 5.5" (total size with self-adhesive pad)